Awaiting for the reply
Re: Specs in Inspection lot
↧
↧
Re: Using Universe Desing Tool COM SDK with Powershell
Being a COm SDK, Universe designer sdk is no tested with Powershell, so not sure if it should work.
Could youtry adding the reference to a VBA editor like excel on the same machine as Powershell?
Does it work?
-Bhushan
↧
1ª parcela somente ST - Contas a Receber
Bom dia!
Estou com um cliente que precisa que a primeira parcela da NFS seja composta apenas pelos Impostos, a única opção que achei foi 'Aplicar imposto na 1ª Prestação', mas selecionando esta opção a 1ª parcela é composta pelo valor da nota + total do impostos e não somente o total dos impostos.
Alguém sabe alguma alternativa além de calcular as prestações manualmente?
Desde já agradeço a atenção!
↧
Re: Erro ao aplicar a nota SAP 2044324 - CPF not considered for B2B NF-e Outbound layout 3.10
Bom dia Jose Nunes,
estamos no SP16 como segue abaixo:
Att.,
Luiz Henrique.
↧
Re: Table conversion after domain change dumps
Hi Jasmin,
starting the back copy to the new table by SE14 goes directly to the dump, so I can check all values.
I see only 1,000 and 1000,000 as values which should fit in a 12 digit field. We have only 1 client.
Perhaps you can send me a hint, how to see the error traces on the HANA side. But I have limited access to HANA via Hanastudio. Maybe DBACOCKPIT allows me to see those logs. But I am quite unexperienced in that area.
Thanks,
Rabanus
↧
↧
Re: Follow up action duriing usage decision
Hi,
Could you please check below point? May be it will help you?
1) Check follow up action --> tick of After posting.
2) Check QS52 --> Are your selected set is released?
3) Check QS52 --> Are your follow up action is maintained against the same code and code group which you are selecting at the time of usage decision?
↧
entering data not in LC and running conversion in default logic
Hi,
we have two datasources, one called INPUT where we enter data in LC and another called EQ where we enter data in group currency, so we enter directly in EUR.
INPUT is defined as IS_CONVERTED = Y and EQ is defined as IS_CONVERTED = G.
In our default logik we run the currency conversion as standard.
This all works fine when we enter data on INPUT, but when we enter data on EQ we get an error message.
Error in logic:
SPRunConversion 10.0.8.0
*ERROR* FX-300 TIMEID = 20141200 - Nothing Extract from Fact - CLCFXTRANS
I kind of understand the message. As I am entering on EQ and therefore already in EUR, there are no values to be converted. Can anyone think of a solution that will still run the fx conversion via the default logic but not produce this error when we enter data in EQ?
Thanks,
Arnold
↧
Re: SOD Detour in Role Approval Workflow possible?
Hi Sabrina,
For Access Request workflow, we generally use GRAC_MSMP_DETOUR_SODVIOL to implement routing rule(based on detour condition - risk found). Purpose of same (if I am not mistaken) is to through the request to another level of approver wherein mitigation monitor agent reviews the mitigation performed by role owner stage and approve/reject the request.
But, when we create a role same is not the condition as we do not mitigate role level risk thus no need to go for mitigation monitor stage. May be you have some business scenario, if you can let us know will be gr8.
For the rule ID, did you try adding the rule ID ?(you may already know, still would like to cross check with you).
GRAC_MSMP_DETOUR_SODVIOL under list of rules for "
Role Approval Workflow" In the screenshot you have shown, just click on ADD feed -
Rule ID -GRAC_MSMP_DETOUR_SODVIOL.
Rule description - same as Access request.
Rule type - Function module based
rule kind - routing rule.
Add this and check if it works and let us know the result too.
Regards,
Nishant
↧
DATE Range Selection option in Module Pool
Dear Experts,
Being new to ABAP I want to learn as how to provide a possibility for
DATE Range Selection Option on Module pool Screen.
Looking forward for your suggestions.
regards
chandan
↧
↧
Re: Crystal Report Server 2013 OEM Edition
Hi Bhavin,
Great, this confirms you are using CRSE. So there is no CMC to publish reports to and the ONLY thing this version is good for is to write an application using Java, .NET or Restful API's and run and view reports in that app.
I suggest you discuss this first with your own Sales Team and if more questions then contact your Account Manager here at SAP and ask them to explain what it is you are using and why you have it and WHO you should be selling that version to. I suspect this is the wrong product for them.
What they need is CR Server ( without the E ( Embedded ) version ). CRS is a full version but limited to one PC, smaller deployment and usage. Then they need to also purchase Crystal Reports Designer to create Reports and then publish them to CRS for running, viewing etc.
Don
↧
Re: Duty Free Import Process
Hi Krishna,
I am trying to implement the same scenario in my project. Can you please help me how did you achieve this requirement. Also, I would like to know what all license related information are you entering at the time of GR.
Are you also tracking amount of import or custom duty that you have debited against a particular license. I mean, if my license allow me to take exemption of Rs. 100 and I have already used Rs. 60 by using that license, are you tracking this feature also.
↧
Re: Edit user account details in SAP CLM
Hi,
Under Users and Security settings, have you enabled the values to Allow? There are 2 things that need to be done. 'Security Profile' and 'User Account' both need to have the values set to Allow.
Hope this helps.
Thanks,
Vikram
↧
Re: How to change the path of an Access .mdb file @ runtime in Visual Studio 2012
I have started a new single form app with just the Viewer on it. I've plugged in the code from the link and fixed the typos.
I need to confirm, which Extensions references should be added to the Solution. I am presuming:
CrystalDecisions.ReportAppServer....
ClientDoc
DataDefModel
ReportDefModel
Controllers
I've gone ahead and done so. But get these messages (warnings):
A reference was created to embedded interop assembly 'CrystalDecisions.ReportAppServer.DataDefModel' because of an indirect reference to that assembly from assembly 'CrystalDecisions.Shared'. Consider changing the 'Embed Interop Types' property on either assembly.
When I run the project, nothing happens. Do I need to add the .rpt to the solution? I am strictly going by what's on the link, not adding anything but the default viewer.
↧
↧
JDBC Connection Pooling using datasource
Hi,
We are trying to create a JDBC datasource in NWA and use it in message mapping. Have followed the below links and the datasource shows as active in NWA.
http://scn.sap.com/people/ayyapparajkv/blog/2008/11/21/creating-jdbc-data-sources-using-nwa-for-different-databases-in-ce
However, when trying to use the datasource, getting the below error. The JDBC drivers for MSSQL 2008 are installed and I can do a lookup using the standard JDBC lookup provided in mapping.
Anyone faced a similar problem?
Regards
↧
Re: Display PO Conditions / Pricing Subscreen
Hi guys,
thanks, but a workaround using a splitter container is not what I was looking for.
Meanwhile, I managed to display the condition window in my subscreen (using the PRICING_SUBSCREEN_SET_DATA FM and a CALL SUBSCREEN statement).
I'm still struggling with the handling of the user command (for example, scrolling through the list or recalculating the conditions), so if anyone can help me on this topic, I would be glad.
//edit:
I solved the user command problem: I just needed to include a CALL SUBSCREEN in my PAI.
Cheers,
Klaus
↧
Re: Loan Amount Wrong Calculated !!!
Hi San,
Post delete got this error; pls.sugest;so that it will not impact in next payroll.
Regards
DR
↧
Re: Processes losing database connection while others don't
Mikel, I think I should have been more clear in my original post regarding the request logging. The database calls that I don't see in the request log seem to get responses from the database because the application is running properly at the time based on my logs that are generated. Just wanted to add that.
↧
↧
BOM, configurable K position Placeholder
Hello Experts,
here is my scenario:
| Material | Class | Type |
|---|---|---|
| A | APPEARENCE | 300 |
B | INHERIT | 200 |
| B | CUSTOMIZE | 300 |
| Class | Characteristic |
|---|---|
| APPEARENCE | COLOUR |
| APPEARENCE | SIZE |
| INHERIT | SIZE |
| CUSTOMIZE | COLOUR |
BOM for material A is as follows:
| Position | TpP | Tp.pos | Tp. | Class |
|---|---|---|---|---|
| 10 | K | L | 200 | INHERIT |
B has a configuration profile "PROFILE".
Within "PROFILE" there is a dependency of type "procedure" whose code is:
$SELF.COLOUR = $PARENT.COLOUR.
Simulations with CU50 results in the following error: "CX051", whereas changing BOM positon 10 to tpP: L instead of TpP: K succeed.
In other words B is able to inherit characteristic colour from A if and only if explicitly placed in BOM with type position L.
This is just a simplified example of my actual case and I need to configure a BOM element that I am not able to know statically. Does anyone know how to make this BOM work as expected with position K?
Ask me for further details. Thanks in advance!
Carlo Alberto
↧
Re: % to Revenue formula
I understand what your showing here, let me screenshot an excel spreadsheet to show what I'm trying to achieve, its not just a revenue report, but rather I would like to see what % of expenses is contributing to the revenue: ex.
↧
Re: Passing extension fields via HCI in a C4C-ERP integration scenario.
Thanks Ravi for the guide.
This guide explains how to update the WSDL in HCI and use it for mapping for both C4C and ERP.
But this guide doesn't explain how to import the actual WSDL from the ERP system.
I can currently get the WSDL from C4C and import the same in HCI. No issues with that.
Want to do the same from ERP.
My problem is " Importing the WSDL from ERP ". Once I have that WSDL I can import the same in HCI . Any valuable information on the above will really help.
Thanks,
Suvankar
↧
More Pages to Explore .....
