Cost spilit is not happening Costing based COPA

November 13, 2014, 8:19 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Cash desk payment error

≪ Previous: Re: About Number Range

Dear All,

Please give me some hints on this

we are using costing based copa

We have booked the cost in Cost centers and allocated to Business process using T.CODE : KSU5

We have allocated cost from Business process to Products using T.CODE: CPAE

we have created the COPA Report and executed in KE30 now cost is showing in Value field which was configured in Transaction : KEI2

but cost needs to be updated as per cost component split but it is not happening( we have done cost component split configuration also)

Thanks&Regards,

Madhav.

↧

Re: Cash desk payment error

November 13, 2014, 8:20 pm

Latest and popular articles on SAP ERP

≫ Next: Re: mmc cannot open the file C:\windows\sapmmc.msc

≪ Previous: Cost spilit is not happening Costing based COPA

Hi All,

No there is no custom code and there is no error message in the clearing variant.

Its the same clearing variant assigned to different clearing types for incoming payment but its performing differently for cash desk payment thru cash.

Thanks

Satyajeet

↧

Re: mmc cannot open the file C:\windows\sapmmc.msc

November 13, 2014, 8:21 pm

Latest and popular articles on SAP ERP

≫ Next: Re: OpenDocument in Geomap - Pop-up not displaying second report/map

≪ Previous: Re: Cash desk payment error

all the SAP services are running fine except for SCS instance.

So, removed the service and tried to install again with sapstartsrv, but since then I am facing issue.

it keeps on throwing the error that "dynamic link library librfc32.dll could not be loaded"

I see that in system32 folder there is librfc32u.dll and in syswow64 there are librfc32.dll and librfc32u.dll both.

I registered them using regsvr32 but still no help.

sapstart.log

--------------------------------

SAP-R/3-Startup Program

Starting at 2014/11/12 11:17:48

Startup Profile: "\\VMSAPECCEHP6\sapmnt\SL7\SYS\profile\START_SCS04_VMSAPECCEHP6"

Starting Programs

(7028) Execute: C:\usr\sap\SL7\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=\\VMSAPECCEHP6\sapmnt\SL7\SYS\profile\SL7_SCS04_VMSAPECCEHP6 list:C:\usr\sap\SL7\SYS\exe\uc\NTAMD64/scs.lst

(5692) Execute: C:\usr\sap\SL7\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=\\VMSAPECCEHP6\sapmnt\SL7\SYS\profile\SL7_SCS04_VMSAPECCEHP6 list:C:\usr\sap\SL7\SYS\exe\uc\NTAMD64/sapcrypto.lst

(11356) CreateProcess: C:\usr\sap\SL7\SCS04\exe\msg_server.EXE pf=\\VMSAPECCEHP6\sapmnt\SL7\SYS\profile\SL7_SCS04_VMSAPECCEHP6

(9012) CreateProcess: C:\usr\sap\SL7\SCS04\exe\enserver.EXE pf=\\VMSAPECCEHP6\sapmnt\SL7\SYS\profile\SL7_SCS04_VMSAPECCEHP6

(7916) Parent Shutdown at 2014/11/13 7:55:18

(7916) Cannot terminate child processes.

-------------------------------------

---------------------------------------------------

trc file: "sapstartsrv.log", trc level: 0, release: "720"

---------------------------------------------------

pid 7916

[Thr 8568] Thu Nov 13 07:41:14 2014

SAP HA Trace: SAP Microsoft Cluster library '720, patch 622, changelist 1520286' initialized

CCMS agent initialization for instance type SCS: return code 255.

Initializing SAPControl Webservice

Starting AutoRestart thread

AutoRestart thread started, version check is enabled

SapSSLInit failed => https support disabled

Starting WebService Named Pipe thread

Starting WebService thread

Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_04

Webservice thread started, listening on port 50413

VMSAPECCEHP6\Administrator is stopping SAP System at 2014/11/13 7:55:18

SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 214]

SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 936]

VMSAPECCEHP6\Administrator is starting SAP System at 2014/11/13 8:27:46

SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 214]

SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 936]

---------------------------------

dev_ms

[Thr 7684] Wed Nov 12 12:34:46 2014

[Thr 7684] MsJ2EE_AddLoggedInNode: node [36059050] is already in logged in list

[Thr 7684] LOGIN: J2EE36059050 [10.1.20.20] (UPD )

[Thr 7684] LOGIN: JM_T1415792086924_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792086924_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:34:49 2014

[Thr 7684] LOGIN: JM_T1415792089678_1_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792089678_1_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:35:57 2014

[Thr 7684] LOGIN: JM_T1415792157037_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:35:58 2014

[Thr 7684] LOGOUT: JM_T1415792157037_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:36:11 2014

[Thr 7684] LOGIN: JM_T1415792171177_1_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792171177_1_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:39:39 2014

[Thr 7684] LOGIN: JM_T1415792379722_2_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792379722_2_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Wed Nov 12 12:40:10 2014

[Thr 7684] LOGIN: JM_T1415792410165_3_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792410165_3_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGIN: JM_T1415792410183_4_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] LOGOUT: JM_T1415792410183_4_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Thu Nov 13 06:33:49 2014

[Thr 7684] LOGOUT: J2EE36059000 [10.1.20.20] (DIA )

[Thr 7684] Thu Nov 13 06:34:00 2014

[Thr 7684] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 13082]

[Thr 7684] Thu Nov 13 06:34:01 2014

[Thr 7684] *** ERROR => MsSClientHandle: MsSRead C3 (JM_T1415787622917_0_VMSAPECCEHP6), MSEINTERN [msxxserv.c 5463]

[Thr 7684] LOGOUT: JM_T1415787622917_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

[Thr 7684] Thu Nov 13 06:35:31 2014

[Thr 7684] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 13082]

[Thr 7684] *** ERROR => MsSClientHandle: MsSRead C4 (J2EE36059050), MSEINTERN [msxxserv.c 5463]

[Thr 7684] LOGOUT: J2EE36059050 [10.1.20.20] (UPD )

[Thr 7684] MsJ2EE_AddDisconnectedNode: add node [36059050] into disconnect list

[Thr 7684] Thu Nov 13 06:35:39 2014

[Thr 7684] LOGOUT: JC_VMSAPECCEHP6_SL7_03 [10.1.20.20] (DIA )

[Thr 7684] Thu Nov 13 06:53:29 2014

[Thr 7684] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 13082]

[Thr 7684] *** ERROR => MsSClientHandle: MsSRead C1 (JM_T1415706082932_0_VMSAPECCEHP6), MSEINTERN [msxxserv.c 5463]

[Thr 7684] LOGOUT: JM_T1415706082932_0_VMSAPECCEHP6 [10.1.20.20] (UPD )

↧

Re: OpenDocument in Geomap - Pop-up not displaying second report/map

November 14, 2014, 9:07 pm

Latest and popular articles on SAP ERP

≫ Next: KP26 Rate update Process

≪ Previous: Re: mmc cannot open the file C:\windows\sapmmc.msc

Andrew:

it is no fault of yours. This is a bug in Mobi since v5.12. The issue had been logged since May. In my environment, even the latest 6.16 does not address it.

if you can get your hand on a v5.1.9, you will see the pop-up works beautifully.

peter

↧

KP26 Rate update Process

November 14, 2014, 9:10 pm

Latest and popular articles on SAP ERP

≫ Next: Re: SP to Block the duplicate values in a UDF

≪ Previous: Re: OpenDocument in Geomap - Pop-up not displaying second report/map

Dear Expats

We need to know the actual information required to fill up the below field in KP26 Transaction.

Example :

Total Labor cost forecast is BDT 300,000/- (per month)

Total Labor hours is 10,000 (Man hourrs) (per month)

Per Labor hours is BDT 30/-

When production order confirm the Labor activity - One hours - system should take the cost BDT 30/-

This is our requirement.

Pls. give advice where we will put this information to update the KP26 field.

What is the field info of

1) Price (Fixed)

2) Variable Price

3) Price unit

Regards

Tarek H Chy

↧

Re: SP to Block the duplicate values in a UDF

November 14, 2014, 9:13 pm

Latest and popular articles on SAP ERP

≫ Next: Re: UWL

≪ Previous: KP26 Rate update Process

Hi Qasim,

Use this to prevent the duplicate values:

If @object_type = '18' and @transaction_type in ( 'A', 'U')

BEGIN

If exists (Select DocEntry From OPCH I

Where I.DocEntry !=@list_of_cols_val_tab_del

and I.U_REFERTEST=

(Select ii.U_REFERTEST From OPCH ii

Where ii.DocEntry=@list_of_cols_val_tab_del) )

begin

select @error =12

select @error_message = 'Duplicate Entry!!'

end

END

I have used the U_REFERTEST field to check and prevent the duplicate values. You can change it accordingly.

Hope it helps.

Thanks & Regards

Ankit Chauhan

↧

Re: UWL

November 14, 2014, 9:14 pm

Latest and popular articles on SAP ERP

≫ Next: Routings and capacity calculation

≪ Previous: Re: SP to Block the duplicate values in a UDF

Also you can check default trace logs.

↧

Routings and capacity calculation

November 14, 2014, 9:04 pm

Latest and popular articles on SAP ERP

≫ Next: Re: KP26 Rate update Process

≪ Previous: Re: UWL

Helo experts

we are operating in cell concept, in that one worker in a cell will operate two to three machines simultaneously to complete the component,

and while creating routings i have incorporated time incured in all the three workcenters seperately in sequence as shown below

0010 workcenter1 10mins

0020 workcenter2 25mins

0030 workcenter3 20mins

( these three workcenters form a cell)

the actual time to complete the component is just 25 mins, " Bottleneck" time. in this case i am getting problem while calculating capacity its calculating as 55 mins, its adding up all.. i can have only the bottle neck time in sap but it ll have as effect in costing, and in production orders we ll not get the operation sequences,

so pls tell me how can i record the operations in routing, so that it ll not get calculated in capacity calculations but get considered while costing.

Please help

Thanks,

↧

Re: KP26 Rate update Process

November 14, 2014, 9:25 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Transfer data to One Time Type to another Time Type

≪ Previous: Routings and capacity calculation

At KP06, say in your example out of 300000 BDT, 200000 is fixed then you have to give this amount in fixed col and balance 100000 you have to give in your variable col.. In KP26 you have to give total hours to be planned and then calculate price by KSPI. As a result you will see that your hourly (price unit 1) price will come 30 and in the fixed is 20 and variable is 10. This process applies if you calculate price by the system.

If you are giving manual prices then you have to calculate fixed and variable portion out of system and give data here in fixed and variable column accordingly and also the price unit as your are giving this price for one hour or hundred hours.

Regards

Rajneesh Saxena

↧

Re: Transfer data to One Time Type to another Time Type

November 14, 2014, 9:27 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Not getting data from one DC to another DC

≪ Previous: Re: KP26 Rate update Process

Where in ZPLD PCR do some changes

HRS=0.5

HRS*-1

ADDMB9SEP

i.e we are removing Z and next two lines HRS=0 ADDMB9SEPZ.

Once you are done this changes save it and execute again and check.

Regards

Venkatesh

↧

Re: Not getting data from one DC to another DC

November 14, 2014, 9:28 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Link to get Approvers and Link to get request status are not coming corrrectly

≪ Previous: Re: Transfer data to One Time Type to another Time Type

Hello Vamshi,

First you should check the mapping between view controller and interface controller.

For your reference check the below link http://help.sap.com/saphelp_nw70/helpdata/en/44/a2384162316532e10000000a1550b0/content.htm

Hope it will help you

↧

Re: Link to get Approvers and Link to get request status are not coming corrrectly

November 14, 2014, 9:30 pm

Latest and popular articles on SAP ERP

≫ Next: Re: How to undo the changes done on WebDynpro iview personalization in sap ess applications

≪ Previous: Re: Not getting data from one DC to another DC

do 1 thing, go to se16.

and look for table GRFN*NOT*MSG. for got name and in for approve by email change it manually to the name of version you have created.

Regards,

Prasant

↧

Re: How to undo the changes done on WebDynpro iview personalization in sap ess applications

November 14, 2014, 9:30 pm

Latest and popular articles on SAP ERP

≫ Next: Re: performance issue in webdynpro java iview portal 7.0 version

≪ Previous: Re: Link to get Approvers and Link to get request status are not coming corrrectly

There is a drop down in personalization interface.

It is called "Personalized elements"

There you will get a list of all items you have personalized.

You can select your item and revert that.

↧

Re: performance issue in webdynpro java iview portal 7.0 version

November 15, 2014, 9:40 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Having more than 1 .wid file in same location of IFRS

≪ Previous: Re: How to undo the changes done on WebDynpro iview personalization in sap ess applications

Hi Experts,

Would you please give your suggestions to reslove this issue.

its urgent . i will give full points.

Thank you,

Regards,

Vanitha

↧

Re: Having more than 1 .wid file in same location of IFRS

November 15, 2014, 9:40 pm

Latest and popular articles on SAP ERP

≫ Next: Re: Migrate from Data Insight 3.2 to Information Steward 4.2.

≪ Previous: Re: performance issue in webdynpro java iview portal 7.0 version

Thanks Denis for the info. Let me try publishing using Webi Rich client and check.

@Jawahar Yes the report names where same. Nice idea to run Repo Scan to know the defect. Let me try.

Thank you both for your replies.

↧

Re: Migrate from Data Insight 3.2 to Information Steward 4.2.

November 15, 2014, 9:41 pm

Latest and popular articles on SAP ERP

≫ Next: RFC Connection is OK but program function is not working

≪ Previous: Re: Having more than 1 .wid file in same location of IFRS

Hi Dhareppa,

We will use Data Insight for profiling only. What rules do you need to migrate?

If you are using base data cleanse transform in DS 3.2 , We need to export the dictionary file and rule files. In the information steward while migrating, it asks the dictionary xml file and rule file to import.

Thanks & Regards,

Ramana.

↧

RFC Connection is OK but program function is not working

November 15, 2014, 9:43 pm

Latest and popular articles on SAP ERP

≫ Next: Re: need a help in UD Query

≪ Previous: Re: Migrate from Data Insight 3.2 to Information Steward 4.2.

Hello SAP Gurus,

I am having a problem right now...we are connected to another SAP server, connection is. Testing is done through SM59 and I used RFC_PING also. Both sides can ping servers but function program is not working.

Any ideas what might be causing the problem?
Thank you very much!

↧