Hi Richa ,
Please remove that link first , i think the data is huge or you don't have the access the concern data.
Can you please post the error analysis.
Regards,
Krishna
Hi Richa ,
Please remove that link first , i think the data is huge or you don't have the access the concern data.
Can you please post the error analysis.
Regards,
Krishna
i did that but still same error
Dear All,
I have working on SAP BW 7.3 and following is the format of data in "Excel"
and following is the screen shot of data in DataSource during Read Preview Data.
1. In Excel "Column: A" format is Text and its not being fetching correctly into DataSource Preview data correctly as its missing dot(.) and its after number, why?
2. In Excel "Column: D" format is Number with 2 decimal places but its not being fetching correctly into DataSource Preview data correctly as its missing decimal and its values, why?
3. Do I need to change the column format into Excel or at DataSource level in Proposal tab?
4. What should I do to fetch the record in correct manner?
Many thanks!!!
Tariq Ashraf
Thanks Ginger Gatling.
hii Darshan
in your validation condition write else statement and call screen again in that else.
hope it will solve your problem
Regards
Gaurav
Hi,
I have been searching and trying various thread on the dynamically passing the url of webservice to a button and calling webservice from different system without any manual changes, but failed to achieve the desired result.
I have a data connection and used it to bind the form element with the importing and exporting parameter of the interface. When I drag and drop the button from the data connection it created a button with execute type of event with the non editable field for the webservice url and interface.
Now when the same form and webservice gets transported to qa and PRD this url will change, hence one option is to update the url manually(which is pretty obvious) solution and other is to pass the url to the button at runtime, Can any one please provide a details and working solution for this or let me know if this is actually possible?
Thanks in advance.
Pooja
It is possible due to some code which is going in infinite/long loop.
Please check if there is any BADI implementation done to change the result.
Also, you may check if it is ending in time_out ABAP dump or some other dump due to reaching maximum allowed time.
Hello all,
As mentioned in the title, I need 541 movement to create inspection lot.
To this goal, I configured T156SY and T156M tables as below( I may have done this wrong),
I also maintained the master of material with inspection type '05'.
Now system creates inspection lot, sends material to quality stock but, in QA12 inspection lot stock tab is missing. I cannot send material from quality stock to unrestricted by using qm.
What did I do wrong?
Thanks.
Arda
Hi,
I am migrating a project from VS2005 to VS2012. The project is using Crystal Report. We have downloaded and installed Business Component for VS2012.
However, While viewing reports, it is giving error "Unable to open connection". Database is SQL Server 2000
Kinldy advise.
Thanks in advance,
Ramprosad
Hi Ashfaq,
If you want to remove the request. Try this Function module:
1. Go to SE37. Give - RSSM_DELETE_REQUEST and press F8.
2. it will ask as follows :
REQUEST - Give the respective DTPR* that is there in the header tab of the process monitor not the request number
INFOCUBE - Give the DSO name (even though it asks for infocube name DSO can be used)
Then execute or F8
I have tried it myself and saw the request being removed.
I hope it helps you too !
Looking forward for the result at your end .
Thanks
Manasa
Message was edited by: manasa chindam
Hi,
I don't understand when "I must select the trading field from dynamic selection of the report".
I dont find in the program FAGL_FC_VALUATION, the field SL partenaire
in tab posting ? in tab open item ? GL balance ? in tab Miscellaneous
Regards
Bastien
Yes, that was expected.
Hi Praveen,
Yes I understood the point, If Source is Webservice, I will create the structure and generate WSDL & URL and give it to source team for sending the data.
My question is :
For creating the structure ,I need field details, sequence, cardinality .. etc.
Will these data type(structure)details will be provided by source team or I can create any structure on my own and give the WSDL to source system to send data?
Regards,
Sarvjeet
Hello,
I was trying to create Z Enhancement spot, Enhancement point and its implementation. I was getting the Information message again and again with the content as 'Defines an enhancement spot in another object'.
I need to know is that whether the Enhancement spots are Program specific ?
Same question was also asked by some other member in 2012 on SCN but i did not find any option to recall a question in SCN so posting it here .
Regards,
Navneet
Hi Ranjeet,
I'd prefer to use a Supplement flag, since with Supplement you will have better visibility of budget changes within Info System.
For complete process overview refer to this post:
Year End closing and carry forwarding with investment management
Regards,
Paulo
Hi
I'm about to start installing a RDS for PPM 6.0. In the SBS (Step-By-Step Guide) standard test plans and scripts are listed as accelerators. In the RDS package, however, I cannot find any documents describing the test plan or scripts. There are no links to these documents in the SBS.
Does anyone know where to find these documents for PPM 6.0?
I can of course create this manually, but it will save a lot of time to use the provided accelerators.
Thanks!
Br,
Lars
Delete your old alert and check with new update. Let me know your result.
sorry forgot to mention link:
Configuring the Sender SOAP Adapter - Advanced Adapter Engine - SAP Library
Hi team,
I have a requirement in which i have to create PO with reference of PR,
and header text of PR should be visible at the time of adopt button press without save of PO.
I am using the below enhancement for this purpose in user exit EXIT_SAPMM06E_012
gt_tekpo[] = tekpo[].
SELECT SINGLE low FROM tvarvc INTO ls_tvarvc-prid
WHERE name = c_name1
AND type = 'S'.
IF sy-subrc = 0.
SELECT SINGLE low FROM tvarvc INTO ls_tvarvc-poid
WHERE name = c_name2
AND type = 'S'.
IF sy-subrc = 0.
LOOP AT gt_tekpo INTO gs_tekpo.
IF gs_tekpo-banfn IS NOT INITIAL.
lv_tdname = gs_tekpo-banfn.
lv_prtdid = ls_tvarvc-prid.
lv_potdid = ls_tvarvc-poid.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = lv_prtdid "'B01'
language = sy-langu
name = lv_tdname
object = 'EBANH'
TABLES
lines = gt_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
gs_header-tdobject = 'EKKO'.
gs_header-tdid = lv_potdid."'F02'.
gs_header-tdspras = sy-langu.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = gs_header
insert = 'X'
TABLES
lines = gt_lines
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
Br,
but its working after saving the PO.
Please suggest.
Surya