I have tried to login to HCP , trial, but its very very slow. Is anyone else facing the same issue?
Regards,
Lakshmi
HCP is very slow.Is anyone facing the same ?
↧
↧
Re: Not able to generate quota only for 1 pSA
HI,
check V_001P_D have you maintained PSA grouping, check and test it once, if it is not working share the screenshots
Thanks
Sayini.S
↧
Re: 'The session has timed out - please log in again.' error when clicking certain
This issue was resolved when I installed PER 2.0 SP3.
↧
Auto-Incident creation
Hi,
I configured an ITSM+SLA demo scenario, and I would ike to test the Auto-Incident creation too.
So when an Alert occurr , an Incident should be created in automatic way in Service Desk.
Where can I find documentation about the Auto-Incident scenario ?
regards
↧
Re: Release strategy for closed Purchase Requisitions
can we do this through exit ?
↧
↧
Subscreen not appearing in the correct place
Hi
I have created a subscreen and it is getting displayed on the main screen.
Only issue is that the subscreen is not getting displayed inside the subscreen area but overlaps with the buttons below the subscreen area.
Main screen
output-
↧
Re: HR Renewal UI5 - Gateway Hub, WebDispatcher forwarding?
have you seen the admin guide for this?
See the explaination above and follow this
↧
Re: processing happens only in debug mode.
Hi All,
I have also same problem I have a program through wich I am creating a document and posting that document by bapi_post FM but that is working only in debugger not in direct execution.
I have tried with wait andbapi_transaction_commit FM also but still it has same issue.
Please do suggest any solution for it.
@ smita: do you got some solution?
Thanks in advance!!!
Deepti
↧
Re: Configuration Webdispatcher on HR Renewal ESS/MSS
↧
↧
Re: Asset Link with equipment
Hi Sunil,
Thanks for the info.
How are you differentiating with the current equipment list ?
For example : If you have 10 equipments - A to J... In that if A and B are damaged, how you differentiate now, do you have user status or any thing else ?
Regards
Terence
↧
Re: dev_w5 growing incredibly fast
Hello Symon,
I believe it's best to not mix issues in the same thread.
Maybe opening a new thread is better (see the SCN rules of engagement 
).
regards!
↧
Re: PPDS PPM - component qty / unit - need to have the qty in alternative unit
Hello Pilvi,
I agree with solution given by an expert DB49, however if you want transfer Components with alternative unit of measure please implement modification given in OSS note
952449 - PPM transfer: Components with alternative unit of measure
Please read the note careful as this modification is not covered by the SAP standard support.
Best Regards,
R.Brahmankar
↧
Re: Please i would like to know the kind of questions asked when performing requirement gathering for SFC
Hi Adeyemi, what is SFC?
↧
↧
How to modify layout WebGui on NetWeaver Business Client?
Hello,
how can I modify layout WEBGUI to make it equal for all users?
In some cases the user, after logon, access to the Business WorkPlace, in other cases, access to the menu "Telephone Integration" and so on.
If the user, after the logon, go to transaction "S000" the system maintains a standard layout, but if the user try to access to one of the functions
of the portal than the system changes the line spacing between the lines of the menu "S000".
I tried to set in "SU01 - Defaults - Start Menu" the value S000 or SMEN but not working.
Where can I set these properties?
Thanks,
Alessandro Scattola.
↧
Re: Issue with the routine
Hi,
1. Don't keep select inside loop. It should be outside the loop.
2. Write the code: select
Icoorder
.................
............................
........................ from /bic/azka_fiar00 into table it_fiar for all entries in result_package where <condition>.
3. Debug the code.
Thanks,
Swapna Jain
↧
create custom Textfield controls in openui5 table columns
Hi All,
I need to create a custom textfield control in each openui5 table columns for filtering column values(I don't want to use default filter options in table columns). I have add my code snippet here.
In my sample.View.js:-
var oTable2 = new sap.ui.table.Table({
visibleRowCount: 10,
firstVisibleRow: 3,
selectionMode: sap.ui.table.SelectionMode.Multi,
navigationMode: sap.ui.table.NavigationMode.Paginator,
renderer: function(){
sap.ui.core.Control.extend("sap.ui.my.controls.ContextMenuItem",{
metadata : {
properties : {
"title" : "string",
"id" : "string"
},
events : {
"select" : {}
}
},
renderer: function(oRm,oControl){
oRm.write('<div style="width:100%";border:"1px solid red">');
oRm.write('<span class="custom_Filter_Column">');
oRm.writeEscaped(oControl.getTitle());
oRm.write('</span>');
oRm.write('<br>');
oRm.write('<input id="txtFilter" type="text" style="width:100%;">');
oRm.write('</div>');
},
});
}
});
oTable2.addColumn(new sap.ui.table.Column({
label: new sap.ui.my.controls.ContextMenuItem({ title:"TRANSACTION ID",id:"TRANSACTION_ID"+"-"+Math.floor((Math.random() * 10000) + 1)}),
template: new sap.ui.commons.TextView({text:"{TRANSACTION_ID}" }),
width : "150px",
hAlign : "Center"
}));
While using this, I am getting the error like sap.ui.my undefined.
I need to be place the textfield below the Columns label. For more clarity please see the screenshot.
What did I wrong in this? Can anyone help me on this??
any help will be highly appreciated.
Thank,
Jayanchanthres
↧
Re: Restriction on maintenance order
Hello Lokesh,
I see 3 questions here.
1. The first one is worked out here. Restrict TECO of PM Order before CNF status (User Exit IWO10004)
2. Solution to Goods movement part is here: IW41-Restrict confirmation without goods issue
3. For settlement you need to find an exit in Finance area for which you need to consult FICO persons and write the code there.
KJogeswaraRao
↧
↧
Re: Error as file cannot be read
Hi,
Please try as below.
DATA : begin of I_tab occurs 0,
text(100),
end of I_tab.
OPEN DATASET P_FILENM FOR INPUT IN TEXT MODE ENCODING DEFAULT.
do.
READ DATASET P_FILENM INTO I_tab.
if sy-subrc <> 0.
Exit.
Endif.
SPLIT I_tab AT ',' INTO
<FS2>-bukrs
<FS2>-belnr
.
APPEND <fs2> to ts_output.
enddo.
CLOSE DATASET w_filepath.
Also Please check if the <fs2> has been assigned with the correct structure.
Hope this helps
↧
how to restrict the records not matching the conditions
Hi,
We have a cube having snap shot period, Document period and Value.
| Sanp Shot Period | Document Period | Value |
|---|---|---|
| 004/2015 | 003/2015 | 10 |
| 004/2015 | 006/2015 | 20 |
| 004/2015 | 002/2015 | 30 |
| 004/2015 | 001/2015 | 40 |
| 004/2015 | 005/2015 | 50 |
| 004/2015 | 006/2015 | 60 |
| 004/2015 | 004/2015 | 70 |
| 004/2015 | 006/2015 | 80 |
| 004/2015 | 005/2015 | 90 |
My requirement is to show only the values where snap shot period GE document period.
Expected output is as below.
| Sanp Shot Period | Document Period | Value |
|---|---|---|
| 004/2015 | 003/2015 | 10 |
| 004/2015 | 002/2015 | 30 |
| 004/2015 | 001/2015 | 40 |
| 004/2015 | 004/2015 | 70 |
I have created formulae variable with replacement path on snap shot and document period.
Used these formulae variable in a CKF where snap shot period GE planning period to get the values.
The issue is I am getting the records which are satisfies the conditions and the records which are not satisfies also.
The Values for the records which are not satisfies the conditions coming as 0.
Output coming as below.
| Sanp Shot Period | Document Period | Value |
|---|---|---|
| 004/2015 | 003/2015 | 10 |
| 004/2015 | 006/2015 | 0 |
| 004/2015 | 002/2015 | 30 |
| 004/2015 | 001/2015 | 40 |
| 004/2015 | 005/2015 | 0 |
| 004/2015 | 006/2015 | 0 |
| 004/2015 | 004/2015 | 70 |
| 004/2015 | 006/2015 | 0 |
| 004/2015 | 005/2015 | 0 |
I know through conditions we can avoid this. But we are going to use this in BO,where conditions cannot work.
How can we totally avoid the records which are not meeting the conditions to avoid the data volume.
Regards,
Sai
↧
Table/List on detail.view not bound when SAPUI5 App is launched as SAP Fiori Component
Hi, I am using SAPwebIDE, and have already developed SAPUI5 App using MD/MMD Template (as described here: SAPwebIDE MD/MMD templates unpleasant differences (bound List/Table doesn't work properly in MMD Detail view, but works OK in MD Detail view))
But, the problem is: when I install this app as SAP Fiori Component into our ABAP AS, or just launch this App as SAP Fiori Component from SAPwebIDE i'm getting no bindings to the Table/List placed ob Detail.view:
At the same time, when I launch this App as index.html, I get my table/list full of excellent and fresh data:
The question is: What should i fix in Component.JS to get my bindings the same way as in index.html-way?
P.S. How to re-create this sample App from scratch in SAPwebIDE:
- File/New/Project From Templates
- Master/Detail template, NorthWind as Odata service, "/V3/Northwind/Northwind.svc"
Set MasterSection/Odata Collection: Products.
Then add this xml-code of Bound List into the Detail.view.xml under thePage/content/IconTabBar/items/IconTabFilter/content
Items' path: Order_Details:
<List xmlns="sap.m" id="idList" inset="false" visible="true" headerText="" headerDesign="Standard" footerText="" mode="None" width="100%" includeItemInSelection="false" showUnread="false" noDataText="" showNoData="true" enableBusyIndicator="true" modeAnimationOn="true" showSeparators="All" swipeDirection="Both" growing="false" growingThreshold="20" growingTriggerText="" growingScrollToLoad="false" rememberSelections="true" backgroundDesign="Solid" itemPress=""
items="{path:'Order_Details'}" > <items> <ColumnListItem type="Navigation" counter="0"> <cells> <Text text="{OrderID}"/> <ObjectIdentifier title="{ProductID}" text="{UnitPrice}"> </ObjectIdentifier> </cells> </ColumnListItem> </items> <columns> <Column minScreenWidth="tablet"> <header> <Text text="OrderID" maxLines="0"/> </header> </Column> <Column minScreenWidth="tablet"> <header> <Text text="ProductID / UnitPrice" maxLines="0"/> </header> </Column> </columns></List>P.P.S. I've already tried this Data binding not working for Component based SAPUI5 app solution, but I am not sure if I get it right, it does not work for me/my app.
Best Regards, Ilia.
↧
More Pages to Explore .....
