Thanks for the information. I went through the RS 15.1 Heterogenous Replication Guide and this gave me a good understanding of what can be done. Could the SQL Server be the version 2012? I did not find any interoperability matrix of the components of the heterogeneous replication.
Thanks.
Alphonsine.
Hello Jan
A note re. the exact issue would be useful. E.g.; what issues are you seeing? Errors? Behavior. As it is, I will answer your questions in a general way. Your solution may vary, depending on the actual issue.
Is there any way to avoid the limitation of 3 concurrent processes? RDC has been working fine at many of our customers, but we can’t find that there are any such limitations or are there the same limitations in RDC?
At least two way to avoid the limitation
1) Web farms. See this MS KBA for more info.
2) Upgrade to Crystal Reports Server which is much more scalable than Crystal Reports. For more info see:
http://www.sap.com/solution/sme/software/analytics/crystal-server/implement/licensing.html
Is SAP Crystal Report .NET even slower and less scalable than the older technology RDC (Crystal Report Designer Component) ?
No, not in my experience...
What are our options of scalability for a solution in ASP.NET, because some of our customers with own servers have many users?
Essentially the same question as the first one above?
We found a post on a newsgroup that suggest Crystal Report Server. Is that the same code as SAP Crystal Report .NET? or is it completely different?
It is not too different. You should be able to use the same code with the addition of 2 or three lines of code. See the tutorial here:
Programming the RAS Insight 2007 | SCN
The SCN Discussion here:
How to get select query for crystal report in c# code
Samples:
NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Hello Masa
After some more research into the note you suggested. We implemented the referenced note 1961957 - Improve reading CHIP XML and ran report /UI2/DELETE_CACHE to deploy the changes
Post Processing and recheck steps:
We then ran report /UI2/CHIP_SYNCHRONIZE_CACHE and checked errors are no longer in
table /UI2/CHIP_CHDR
We then ran /UI2/DELETE_CACHE_AFTER_IMP to clear the server side cache for PAGES
This fixed our issue
Thank you!
Regards.
PS: Essentially I think the keyword for what I'm looking for is the 'location services' or 'geocoding' aspect of spatial processing. I've seen some slides talking about location services but can't seem to find any more details. What I'm trying to determine is if there's an easy way to convert physical address to geo coordinates on-the-fly.
Thanks
-Patrick
With help from SAP and notes 1870169 and 1611326 I was able get past the error. I was missing the /usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016 directory in the kernel .
I updated the parm DIR_CT_SAPJVM in the instance profiles with value /usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016
and created the missing directory /usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016 I copied the contents of /usr/sap/A11/DVEBMGS32/exe/sapjvm_4 to
/usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016 When SAP was restarted ,the sapcpe pgm replicated (recopied ) files from /usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016
to /usr/sap/A11/DVEBMGS32/exe/sapjvm_4.
But before starting SAP, I saved the original contents of /usr/sap/A11/DVEBMGS32/exe/sapjvm_4 just in case, and it turns out I did need to restore it back because of an error I made in copying the files to /usr/sap/A11/SYS/exe/jvm/hpia64/sapjvm_4.1.016
After SAP started up ok. I restarted with a new run of SUM and it got past the error.
Rich Heilman presented a nice approach for this here on SCN some time ago (can't find the thread just now... 
)
So this works like this:
select length ('xyz,abc,cde,wer,123,fr,g') - length ( replace ('xyz,abc,cde,wer,123,fr,g', ',', '')) from dummy
Which tells us that you miscounted and that the result actually is 6 
- Lars
does the emplpoyee belongs to Viekn field 10? check the field properties make it required field. probably you need to debug in CL_HRPA_UI_CONVERT_0002_US?
I haven't a technical solution either, but what comes immediately into my mind is the question "Why do you have that many different batches on hand?"
Is the quantity of one batch usually smaller than a sales order quantity, so that you have to fulfill one sales order with several batches?
we are trying our best to pick FIFO, hence we have usually just one batch which has already picks while other batches are still complete in stock. And based on the batch sizes we often have just 1 batch in a delivery or 2 batches if the remaining quantity from the older batch is not sufficient to fulfill the entire order.
Hence having more than 2 batches in a delivery is then an exception can be done with manual intervention, especially as even such customer requirements are not the standard.
But what will you do, or what will the customer do, if you tell him that you can only fulfill the order by delivery from 3 batches or you would need to reduce delivery quantity to meet this requirement of 2 batches? Often the reality looks much different to the wishful thinking.
Dear Rableen
Please let us know if we have to update stats again and cleanup and
restart the same command or after stats update need to start the reorg
same command directly.
check the following SAP Note
1971955 - table reorganization failed using brspace and you met error ora-23539*
Best Regards
AhMeD
YR,
???? Product availability ignores dynamic pegging. ATP has its own time series, which are not directly related to dynamic pegging areas.
I suppose the most likely solution would be to enable fixed pegging.
Once fixed pegging is configured, you can run a heuristic SAP_PP_019 which will create fixed pegging relationships between supply and demand. Within this heuristic it is possible to customize ("User defined settings") how the relationships are created. I have never created one which tied sublocations together, but I would think it would be feasible. I don't remember if sublocation is in the standard field catalogue, you probably would need the help of an ABAPer to get the sort fine-tuned to your requirements.
Once you have established fixed pegging, ATP will generally follow the fixed pegging relationships.
Best regards,
DB49
Hy Bash, from tcode user gen i tried to create an user from a template, but if the user is external, i got an error from hr.
Is it only changing source Location or any other constraint needs to be taken in to consideration.
Hi Manoj,
Thanks for the reply. I forgot to mention that I am on DS 4.0 so I cannot try the RFC method which is available on 4.1 onwards. Anyways I would like to understand the steps by steps process behind the scene in this particular scenario.
Regards,
Blaiso
Hi,
I think you may try EHAUADR_STREET4 because there is no STREET5 field in structure BAPI_EHAUADR and address fields description may be misleading (description "street 2" corresponds to field "street1"). Also be aware that a very good cookbook explaining how to setup the IS-U/CRM integration for technical objects is available at http://service.sap.com/utilities.
Regards,
Nicolas.
There is nothing on your blog - just your web page with absolutely NO information related to the question or the subject.
The first post is 4 years old, but I dug it up again now as the topic popped up again and the old infos are still useful - as are my requirements are approximately the same. Married, 3 kids, 3 cats, 3 hamsters, 2 mice, 1 mother-in-law, home loan, full catastrophe... 
So 2 seater is out, but otherwise nothing against the 370Z other than that I am 41 years old. It would also have to be a GTR to fit the kids into the back seats. Unfortunately still, anything which looks like that is a Subaru in the eyes of the missus, so blacklisted.
What do you think of the Korean cars, just out of curiosity?
Cheers,
Julius
HI Abdul,
Thanks for your help Issue resolved.did a reset of update.
Regards,
Venkatesh Iyer
In our CRM production, every Monday morning around 6.30 AM
system is getting slow. CPU utilization is very high (almost 100 %). But in
SM37, I could not find any job which is running for so long. At that time only
2 jobs were processed but they run every half hour. Other than that as far as I
know nothing is scheduled. Basis is not able to find any job which is causing
issue.
On further investigation, I found that there is one SELECT
statement on BALHDR (App log table, has very high volume of data) table which
is utilizing a lot of system resource and there are large number of memory
reads. This select statement is getting used in FM BAL_DB_SEARCH. This FM has
been called from a lot of programs (all standard), so I am not able to identify
the cause of this issue. I am ABAPer and my basis team is unable to help.
Please help.
Thanks for your help.
Hi Eldar,
Follow the steps to get the calendars from ECC to APO.
Transaction RSA1
Select Source systems>SAP>your R/3 client.
Right click on the client>Select Transfer Global Settings.
Select Factory Calendars
Select Rebuild tables.
BR
Thamizh
Estimados Todos buena tarde, les comento que estoy trabajando en una busqueda formateada para agregar una linea a nivel de detalle ya que tenemos algunos productos que se venden a algunas tiendas al detalle pero ellos tienen su propio codigo, por lo cual estoy tratando de que lo agregue cuando este producto sea vendido y seea reflejado en la factura.
1-. Para ello Defini la Tabla de Usuario @Cod_Alt conteniendo Code; Name, U_Cod_Unisuper y U_Cod_Walmart en los que tengo los valores a Mostrar.
2-. Al Articulo 07.00001 le defini la Propiedad 1 (Codigo Alterno) Valido.
3-. Elabore la siguiente consulta pero no me corre, podrian darme alguna luz del problema
************************************************************************************************
Declare @cod_alt varchar(1)
Select @cod_alt = [QryGroup1] from OITM where itemcode = $[$38.1.0] '
if @cod_alt = 'Y'
Begin
Select Case When $[OINV.U_Facnom] = 'Unisuper, S.A.' then [U.U_cod_unisuper]
When $[OINV.U_Facnom] = 'Operadora de Tiendas, S.A.' then [U.U_cod_Walmart] from [dbo].[@Cod_alterno] U
where [U.Code] = $[$38.1.0] '
Else '' END
end
************************************************************************************************
Muchas gracias en lo que puedan ayudarme.
Saludos.
